Logo




For all your cleaning and Janitorial supplies
. If we don't have it, we can get it!
Ring NOW for latest prices!

Click on Cans To See Technical Data
IS/40 • 400ml
Ejector-Pin Lubricant
Developed specially for the Plastic Moulding Industry, this refined lubricant provides longlasting lubrication to pins, pillars and bushes, without causing contamination to your mouldings. It can be used in temperatures up to 110°C and helps to prevent seizure and protect against corrosion.


QTY Price/Can
1 CAN £8.03
12 CANS + £6.00
 Tygris Ejector-Pin Lubricant
IS/45 • 400ml
Food-Grade Ejector Pin Lubricant
Like the IS/40, this lubricant gives targeted lubrication to pins, pillars and bushes without marking your moulded components. However, its advanced formulation makes it suitable for use in foodmanufacturing areas, and it is temperature stable up to 240°C.

QTY Price/Can
1 CAN £9.59
12 CANS + £7.14
 Tygris Food Grade Ejector Pin Lubricant
IS/25 • 400ml
Mould & Tool Cleaner Xtra
 
Use this fast-acting cleaner to remove surface rust, grease, oil and mould protection from your moulds and other metal components. Evaporating quickly and leaving no residue, the product is dispensed by a CO2 propellant, ensuring that you get a full 480ml of usable fluid.

QTY Price/Can
1 CAN £4.50
12 CANS + £3.58
 Tygris Mould & Tool Cleaner Xtra
IS/27 • 400ml
Mould & Tool Cleaner Supa
Removal of really difficult resin and plastic deposits on your moulds and tools is now possible with this extremely powerful, slowevaporating cleaner. Delivering maximum results, it is effective even on warm moulds where other solvents evaporate too quickly.  
QTY Price/Can
1 CAN £4.62
12 CANS + £3.71
 Tygris mould & Tool Cleaner Supa
IS/9 • 400ml
Mould Release 8
With silicone content reduced to approximately 8%, this safe and odourless light-duty release agent is perfect for delicate moulds where marking might otherwise occur. It can also provide fine and lasting lubrication to a wide range of applications and is heat stable up to 300°C.


QTY Price/Can
1 CAN £2.77
12 CANS + £2.09
 Tygris Mould Release 8
IS/5 • 400ml
Mould Release 10
Combining a special blend of approximately 10% silicone with Teflon, this Silicone Spray provides a very effective release agent for plastic moulding, as well as a wide range of uses in virtually every industry. It is colourless, odourless, non-staining and heat stable up to 300°C.
 

QTY Price/Can
1 CAN £3.23
12 CANS + £2.36
 Tygris Mould Release 10

Page1 of 2 Next
Aroma Janitorial Supplies, 125 Wigley Road, Feltham, Middlesex. TW13 5HB
Tel/Fax: 0208 744 5498 email: Sales@aromajanitorial.co.uk